Retrievingย supplies from yourย truck bed gets muchย easier when youย have a higher center of gravity, and the BedStep and BedStep2 products from AMPย Researchย offer some convenience when reaching into the bed of yourย truck. Instead of having to step onto the wheel or climb in via the tailgate, the AMP Research BedStep2 allows you to easilyย drop down a step when you need toย get that additional reach. Theย BedStep2 is anย incredibly convenient product thatย goes right behind the cab,ย and you can barely see them when theyโreย stowed away. We installedย a pair of BedStep2 steps on each side of our Ford F-150 workย truck (positioned behind a set ofย stainless steel LUND nerf bars) to see if theyโd work as well as advertised.
AMP Research BedStep2 Features
The AMP Research BedStep2 is a durable composite product. It mounts to a steel-hinged frame that installs easily and quickly to the frame of the truck. You can fit it to just about any full-size or mid-sized truck. AMP Research actually has multiple models that include the appropriate mounting hardware. AMP Research made the step using glass-reinforced composite material (similar to cordless power tool bodies).
Itย also has a niceย non-slip surface. I tested this thoroughly by running my truck through mud and using the BedStep2 steps in the rain.
What I love most about the AMP Research BedStep2 is that itโs not overly complicated in design or use. Amp Research constructed it so that it both extends and retracts easily with just the push or pull of your foot. Thereโs no lock, no release leversโฆit just works. Whatโs moreโit can handle up to 300 pounds. Even your โhuskyโ Uncleย Bubba can step on itย to reach that cooler full of brown water bottles. We mountedย two BedStep2 steps on theย right and left sidesย of our Ford pickup. While you can get away with one mounted on the driverโs side, two give you more flexibility. Finally, itโs worth noting that AMP Research BedStepsย are made in the USA.
Installing the AMP Research BedStep2
Installation was easyโbut thatโs because we had the right tools. The system comes with two steel pieces that attach together to securely hold the hinge assembly to the frame. Since we had a 66-inch bed, we used part number 75412-01A which fits late model Ford F-150 trucks through 2019. After assembling the steel brackets for the driver and passenger sides (remember, we had two of these to install), we bolted on the two L-brackets and tightened the 13mm M8 bolts.
Finally, we inserted the included U clips into the frame. We then set the linkage in place and tightened all of the 15mm bolts. They spec to 20 ft-lbs (having a torque wrench really helps). A set of offset box wrenches could makes your life a whole lot easier. Finally, we installed the step pad and tightened it using the included T25 Torx screws.
The BedStep2 on theย Road
To use the Amp Research BedStep2, you just put your toe on the step and push it down and away from the truck. Lift underneath, and it locks right back in place. It never once accidentally deployedโeven at high speeds and over long distances. Itโs a very secure installation, yet easy to use when you need it. Regarding the original Amp Research BedStep, itโs a very similar system but goesย on the back of the vehicle just under the corner of the bumper. On our Ford F-150 we haveย a Draw-Tite Round Tube Max-Frame receiver hitch.It didnโt provide enough thread clearance left to install the BedStep. If thatโs an issue for you, itโs yetย another good reason to consider the side-mounted Amp Research BedStep2.
Pricing:
- AMP BedStepย (#75312-01A) โ $329ย Get more information
- AMP BedStep2ย (#75412-01A) โ $329ย Get more information
