Makita Sub-Compact Hammer Drill Nails Most Compact Size in the 18V Class
Weโve taken over 50 drills and put them in head-to-head competitions with each other by their various classes. If that sounds like something that might tickle your fancy, click your way on over to the Best Cordless Drill review. For now, weโre looking at Makitaโs tiniest entries into the 18V category: the Makita Sub-Compact Hammer Drill (XPH11) and Drill Driver (XFD11).
These two models carry almost identical specs, save for one has a hammer mechanism and the other doesnโt. Letโs look at how these diminutive tools stack up next to their compact 18V peers.
Setting the Table
If youโre not familiar with the Makita Sub-Compact drill/driver lineup, it makes compact even more compact. The basic idea is to take 12V tool size, weight, and performance, and run with an 18V battery so you donโt have to buy into a separate 12V battery platform for those core tools.
So before we dive into the results, letโs start from the perspective that these tools are intentionally designed to be less powerful with a smaller size and weight. If that size reduction is significant compared to other compact drills and hammer drills, then Makitaโs product team met their goal.
Performance
For performance, we test each drillโs speed under load and how much torque it can generate.
Speed Under Load
Out of the gate, Makitaโs intention of sticking to 12V performance is clear against traditional compact models. Out of all of the compact 18V drills and hammer drills, both the Makita XPH11 and XFD11 lagged a bit behind everybody else.
Thatโs no surprise given the design intent. A quick peek at the 12V results in the same test shows that only two of the newest brushless models had speeds higher than Makitaโs Sub-Compacts (Metabo and Skil).
Looking at the efficiency of the Makita Sub-Compact Hammer Drill is these tests, itโs not as high as the majority of the compact class. Again, thatโs not a surprise. We expected the motors to work harder but thereโs nothing to suggest that both the hammer drill and drill driver models canโt handle the task at hand. In general, they feel more capable than the 12V models theyโre replacing.
Shifting from wood to concrete, the Makita XPH11 is the slowest of the group, needing an average of 9.48 seconds to drill 3โณ deep with a 1/4โณ concrete bit. Itโs perfectly capable of making the hole without bogging down the motor, it just needs a little more time.
Torque
Our torque test is a soft torque test and itโs obvious this doesnโt match manufacturerโs specifications since most of them report hard torque. The Makita Sub-Compact Hammer Drill and Drill Driver report their torque as 350 in-lbsโnearly 200 in-lbs less than their compact XPH12.
The difference isnโt quite as dramatic in a soft torque test, but the results show us that the Sub-Compactโs 94.0 in-lbs is well behind the Compactโs 126.4 in-lbs.
Features
There arenโt any crazy bells and whistles with the Makita Sub-Compact Hammer Drill and Drill Driver. They feature brushless 2-speed motors, belt hooks, and LED lights. There are no self-tapping modes or smart controls here. Theyโre pretty basic tools in the grand scheme of things, but they do their jobs well.
Footprint
Finally, we reach the point where the Makita Sub-Compact Hammer Drill and Drill Driver stand out: size and weight.
Both the Makita XPH11 and XFD11 finished their respective weight and footprint categories in 1st place. The Makita Sub-Compact Drill weighs in at 2.04 lbs bare and 3.01 lbs with its 2.0 Ah battery. The hammer mechanism adds a scant 0.14 pounds to the Hammer Drill.
Neither of these Sub-Compacts takes up a whole lot of real estate, either. We measured the XFD11 at 7.8โณ tall and 6.4โณ long. The Hammer Drill is 7.1โณ long thanks to the additional hardware inside.
Value
The Makita XPH11 Hammer Drill retails for $119.99 as a bare tool or $219 for the kit. It comes with two 18V 2.0Ah batteries and a charger.
The Makita XFD11 Drill Drive runs $109 as a bare tool and $209 for the 2-battery kit.
The best value is a 2-tool kit with the Sub-Compact Impact Driver and a couple of batteries. You can pick the Drill Driver combo for around $197 or the Hammer Drill combo for $249.99.
Part of the real value of these tools comes from what they offer 18V Makita users who want to go a size or two down without having to invest in a bunch of 12V batteries. These are small, light, get into tighter spots, and you donโt need to horse around with a whole new battery platform.
Recommendation
Keep in mind that the Makita Subcompact Hammer Drill is essentially a 12V tool strapped to an 18V battery. Its size, which is even smaller than other compact 18V models, makes it incredibly lightweight and compact. The trade-off comes with their available torque and speed. Theyโre not going to crank out the same type of speed and power as most compact 18V drills, but theyโre incredibly handy tools to have when you want 12V size without leaving Makitaโs 18V battery.
Makita Sub-Compact Hammer Drill Specs
- Model Number: Makita XPH11
- Capacity: 1/2โณ (steel); 1-7/16โณ (wood); 1/2โณ (masonry)
- No-Load Speed: 0-500 / 0-1,700 RPM
- Blows per Minute: 0-7,500 / 0-25,000 BPM
- Max Torque: 350 in-lbs / 40 Nm
- Battery: 18V LXT Compact Lithium-Ion
- Length: 6-15/16โณ
- Weight: (with Battery): 2.9 lbs
- LED Light: Yes
- Warranty: 3-Year
- Price: $109 (bare), $219 (kit)
Makita Sub-Compact Drill Specs
- Model Number: Makita XFD11
- Capacity: 1/2โณ (steel); 1-7/16โณ (wood)
- No-Load Speed: 0-500 / 0-1,700 RPM
- Maximum Torque: 350 in-lbs / 40Nm
- Battery: 18V LXT Compact Lithium-Ion
- Length: 6-3/8โณ
- Weight (with battery): 2.8 lbs
- Warranty: 3-year
- Price: $119 (bare), $209 (kit)
