Choosing the Best Floor Jack for Your Truck, Car, or SUV

Choosing the Best Floor Jack is More Than Just Weight Capacity

We’re fascinated by the mechanical advantage of hydraulic jacks. A little physics plus engineering and we’re able to lift literally tons more than we could on our own. So how do you choose the best floor jack for your work? We hopped on a call with Bob Fox from Sunex Tools to get gain some of his nearly 5 decades of experience.

If You Don’t Know Jack, You Should Know Bob

Mr. Fox began his career in lifting equipment in 1970. He’s a wealth of knowledge and has become highly respected in the field over the last half-century. As a member of the ASME board for Portable Automotive Service Equipment, he contributes to the recommendations and regulations in that sector. It’s fair to say he knows jacks.

Looking for the best hydraulic jack for your truck, car, or SUV generally sends you to two categories: build materials and capacity.

The Best Floor Jack: Material Type

Steel

Steel jacks are by far the most popular because they are the least expensive and most durable. The trade-off is weight: they are also the heaviest.

The Pros who opt for steel jacks typically work in repair shops and dealers’ service bays. They perform mostly tire changes and they don’t have to move the jacks too far.

Aluminum

On the spectrums’ other end sits aluminum jacks. These are the most expensive and least durable – but can be less than half the weight of their steel counterparts.

Aluminum jacks are ideal for mobile mechanics, roadside assistance, DIYers, and at the race track where speed and mobility is a priority above all else. In Bob’s experience, some roadside assistance Pros don’t expect aluminum jacks to last more than 3-4 months before it needs a replacement.

Hybrid

Manufacturers introduced hybrid jacks of aluminum and steel a couple of years ago. The important structural components like the lift arms and power units remain steel while the side plates are aluminum. Unsurprisingly, these hybrids strike a balance in both weight and price.

Hybrids can certainly work for mobile Pro use, but the heaviest day-to-day users are still going to stick with steel for its longer durability. Serious DIYers and gearheads looking to get some weight savings like this option as well.

The Best Floor Jack: Tonnage Capacity

1.5-ton steel jacks are taking a backseat in popularity to heavier-duty 3- or 4-ton versions. But do you really need that much capacity?

Most Pro users can get away with 2.5-ton machines, but repair shops usually opt for at least 3 tons to cover all the bases.

The tradeoff with a higher capacity jack is slower action and heavier weight. To counter this, many Pro-level jacks feature a double pump piston system that lifts on both upstroke and downstroke only until the jack is under load. At that point, the jack bypasses one of the pumps and the speed returns to normal.

Determine the appropriate tonnage capacity for your vehicle by locating the Gross Vehicle Weight (GVW) on the sticker in your drivers’ door jamb. Most vehicles also split the weight into front and rear weights. This information is also in the vehicle’s manual.

Make sure the jack you get can lift more than the higher of the two weights. For example, if you know you need 3100 pounds for the front (just over 1-1/2 tons), go for a floor jack that covers you for 2 or 2-1/2 tons. You don’t need to move up to the weight of a 3- or 4-ton unless you just like knowing you can lift a bigger vehicle.

A Short Interjection

One other thing—check the maximum height of your service jack. Some might only go up to 14″ or 15″. That works great on most cars, but get into trucks that have 20″ wheels and you won’t be able to lift it fully or you have to crawl under the vehicle to find a lower contact point.

Which reminds me… check out these service jack safety tips.

And thanks to Bob, you now know jack(s)!